|
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes with full strength in 1 hour. Features: * Bonds rigid durable substrates such as metals, glass, ceramics, concrete, and wood in all combinations. * Forms a clear hard rigid bond self leveling liquid in minutes. * 5 minute working time. * 15 minute setting time. * 1 hour functional cure time. * Water resistant. * 100% reactive, no solvents. * Low viscosity (10,000 cps).
...more about the Devcon 5-Minute Epoxy .5 oz
|
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes with full strength in 1 hour. Features: * Bonds rigid durable substrates such as metals, glass, ceramics, concrete, and wood in all combinations. * Forms a clear hard rigid bond self leveling liquid in minutes. * 5 minute working time. * 15 minute setting time. * 1 hour functional cure time. * Water resistant. * 100% reactive, no solvents. * Low viscosity (10,000 cps).
...more about the Devcon 5-Minute Epoxy 2.5 oz
|
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds using the exclusive applicator. Assures accurate amounts of epoxy and hardener are used each time. Features: * Bonds rigid durable substrates such as metals, glass, ceramics, concrete, and wood in all combinations. * Re-seals for storage. * Forms a clear hard rigid bond self leveling liquid in minutes. * 5 minute working time. * 15 minute setting time. * 1 hour functional cure time. * Water resistant. * 100% reactive, no solvents. * Low viscosity (10,000 cps).
...more about the Devcon Dev-Tube 5 Min. Epoxy 1 oz
|
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes with full strength in 1 hour. Features: * Bonds rigid durable substrates such as metals, glass, ceramics, concrete, and wood in all combinations. * Forms a clear hard rigid bond self leveling liquid in minutes. * 5 minute working time. * 15 minute setting time. * 1 hour functional cure time. * Water resistant. * 100% reactive, no solvents. * Low viscosity (10,000 cps).
...more about the Devcon 5-Minute Epoxy 9 oz
|
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds using the exclusive applicator. Assures accurate amounts of epoxy and hardener are used each time. Features: * Bonds rigid durable substrates such as metals, glass, ceramics, concrete, and wood in all combinations. * Re-seals for storage. * Forms a clear hard rigid bond self leveling liquid in minutes. * 30 minute setting time. * 6 hour functional cure time. * Water resistant. * 100% reactive, no solvents. * Low viscosity (10,000 cps).
...more about the Devcon 30-Minute Epoxy 1 oz
|
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds. Features: * Bonds rigid durable substrates such as metals, glass, ceramics, concrete, and wood in all combinations. * Forms a clear hard rigid bond self leveling liquid in minutes. * 30 minute setting time. * 6 hour functional cure time. * Water resistant. * 100% reactive, no solvents. * Low viscosity (10,000 cps).
...more about the Devcon 30-Minute Epoxy 9 oz
|
|
|
|
|
|
|
|
|
This pack is a very convenient way to order all the epoxy related accessories needed to build a plane and also save some money. Features: This package contains all the epoxy items normally sold separately in a nice shrink-wrapped package.
...more about the Great Planes Epoxy Combo Pack
|
QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason
...more about the Hobbylinc QUICK CURE 5 Minute Epoxy (4 1/2oz)
|
QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIKCURE™ is our only epoxy on which you can apply polyester resins. It can be mixed with microballoons to form a quick setting putty. Items bonded with QUIK-CURE™ can be handled after 15 minutes. Full strength is reached in 1 hour. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason
...more about the Hobbylinc QUICK CURE 5 Minute Epoxy (9oz)
|
MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason is price. Epoxy costs are about one fourth that of CA. When large objects are being bonded, economics can be a deciding factor on choice of adhesive. The specific characteristics of epoxies also give them advantages in some application
...more about the Hobbylinc MID CURE 15 Minute Epoxy (4 1/2oz)
|
MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is ideal for gluing to fiberglass surfaces. Allow 45 minutes before handling parts and 2 hours for full strength. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason is price. Epoxy costs are about one fourth that of CA. When large objects are being bonded, economics can be a deciding factor on choice of adhesive. The specific characteristics of epoxies also give them advantages in some application
...more about the Hobbylinc MID CURE 15 Minute Epoxy (9oz)
|
SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason is price. Epoxy costs are about one fourth that o
...more about the Hobbylinc SLOW CURE 30 Minute Epoxy (4 1/2oz)
|
SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason is price. Epoxy costs are about one fourth that of CA. When large objects are being bonded, economics can be a deciding factor on choice of adhesive. The specific characteristics of epoxies also give them advantages in some applications. All our epoxies are mixed with a 50-50 ratio. Any scrap material or paper scratch pad can be used as a mixing surface. We have found, however, that the plastic tops to coffee cans work best due to their outer border and their flexibility, which allows the
...more about the Hobbylinc SLOW CURE 30 Minute Epoxy (9oz)
|
FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason is price. Epoxy costs are about one fourth that of CA. When large objects are being bonded, economics can be a deciding factor on choice of adhesive. The specific characteristics of epoxies also give them advantages in some applications. All our epoxies are mixed with a 50-50 ratio. Any scrap material or paper scratch pad can be used as a mixing surface. We have found, however, that the plastic tops to coffee cans work best due to their outer border and their flexibility, which allo
...more about the Hobbylinc FINISH CURE 20 Minute Epoxy (4 1/2oz)
|
FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. If CAs are the cure-all for just about all bonding problems, you may be wondering, "Why do I need epoxy?" One primary reason is price. Epoxy costs are about one fourth that of CA. When large objects are being bonded, economics can be a deciding factor on choice of adhesive. The specific characteristics of epoxies also give them advantages in some applications. All our epoxies are mixed with a 50-50 ratio. Any scrap material or paper scratch pad can be used as a mixing surface. We have found, however, that the plastic tops to coffee cans work best due to their outer border and their flexibility, which allo
...more about the Hobbylinc FINISH CURE 20 Minute Epoxy (13oz)
|
Clear, equal-mix. Cures in 5 minutes. Fuel-proof, vibration resistant formula. Flexible and durable, sandable. Excellent for furniture. Features: Works best on: Metal, Furniture, Rubber, Wood, Aluminum, Ceramic.
...more about the Pacer Z-Poxy 5-Minute 4 oz
|
Clear, equal-mix. Cures in 5 minutes. Fuel-proof, vibration resistant formula. Flexible and durable, sandable. Excellent for furniture. Features: Works best on: Metal, Furniture, Rubber, Wood, Aluminum, Ceramic.
...more about the Pacer Z-Poxy 5-Minute 8 oz
|
15 min. work time, cures in 30. Great for fiberglass fuselages, boat hulls, skinning foam parts. Equal-mix, accepts balloon filler for forming fillets. Features: * Works best on: Metal, Fiberglass, Rubber, Wood, Most Plastics,. * Aluminum, Ceramic.
...more about the Pacer Z-Poxy 30-Minute 8 oz
|
|
