Building Supplies

Ultra-light extender makes epoxy or polyester resins lighter and more sandable. Great for joints and fillets, or surfacing over imperfections in wood grain or in fiberglass cloth. Convenient spout offers easy, no-waste pouring for clean,no mess use . Compatible with aliphatic resins and acetone based glues. One 8 oz container of white micro-balloons filler. TOP FLITE SUPREME MICRO-BALLOON FILLER is ideal for thinning epoxy and poly- ester resins to make fillets or repairing
...more about the Top Flite Microballoons Filler 8 oz

Fast drying! Apply to area desired and allow 30 minutes for drying. Easily files or sands to desired shape. Long life. Putty is Green. Bonds to styrene. Great for filling seams and cracks. The perfect hobby filler for planes, ships, cars, figures, armor, and trucks. Box easily conforms into a counter display. Twelve Tubes of Green Putty. This Display Box contains 12 Squadron Green Putty
...more about the Squadron/Signal Green Putty w/Display (12)

Fine grained Green filler. Ideal for filling seams, sink holes and recontouring. Dries hard, has little shrinkage and sands smooth. Easy to paint over without primer. Carded packaging. One 2.5 Oz. Tube of Green Putty. This is a 2.5 Oz. Tube of Gree n Putty from Squadron
...more about the Squadron/Signal Green Putty Carded 2.5 oz

Fast drying! Apply to area desired and allow 30 minutes for drying. Easily files or sands to desired shape. Long life. Putty is White. Bonds to styrene. Great for filling seams and cracks. The perfect hobby filler for planes, ships, cars, figures, armor, and trucks. Box easily conforms into a counter display. Twelve Tubes of White Putty. This Display Box contains 12 Squadron White Putty
...more about the Squadron/Signal White Putty w/Display (12)

Fine grained White filler. Ideal for filling seams, sink holes and recontouring. Dries hard, has little shrinkage and sands smooth. Easy to paint over without primer. Carded packaging. One 2.5 Oz. Tube of White Putty. This is a 2.5 Oz. Tube of Whit e Putty from Squadron
...more about the Squadron/Signal White Putty Carded 2.5 oz

Great for filling gaps and dents on plastic models One part putty requires no mixing Cures in one minute under direct sunlight or 2 minutes under fluorescent light (will not cure under UV or incandescent light) Almost no shrinkage when drying Excel lent workability after curing makes cutting, sanding and filing a breeze Easily painted with paints designed for plastic models. One 1.19oz (34 grams) tube of putty. This is the Tamiya Light Curing
...more about the Tamiya Light-Curing Putty 34 g

Use for filling seams and customizing plastic models. Allow to dry and work to final contour with knife and sandpaper. 5/8 Oz. of Contour Putty. This is a 5/8 Oz. Tube of Contour Putty from
...more about the Testors Plastic Putty 5/8 oz.

Ready-to-Use, no preperation or mixing is required. Filler is very easy to sand, so even sloppy applications can be smoothed for a very nice looking finish. One 8 ounce plastic jar of Balsa Filler. This is a White Colored Filler for filling gaps in the wood of an aircraft fuselage, wing, or tail section before covering is applied for smoother
...more about the Hobbico HobbyLite Filler White 8 oz

Balsa colored filler helps in hiding the filler applied when covering. (White filler shows up through the covering very well, and may appear to have spots.). Ready-to-Use, no preparation or mixing is required. Filler is very easy to sand, so even s loppy applications can be smoothed for a very nice looking finish. One 8 ounce plastic jar of Balsa Filler. This is a Balsa Colored Filler for filling gaps in the wood of an aircraft fuselage, wing, or tail section before covering
...more about the Hobbico HobbyLite Filler Balsa 8 oz

Increases the strength of any epoxy. Perfect for adding strength to firewalls, wing hold-down blocks, landing gear blocks. Easy to use. Can be smoothed over with isopropyl alcohol for a sleek finish. One 4 oz bottle of Milled Fiberglass. This is a 4 oz bottle of milled fiberglass that is used to strengthen epoxy bonds. It is mixed with epoxy glue at a ratio of 1/4 to 1/2 teaspoon per ounce of epoxy. (ratio verified w/product manager KB
...more about the Great Planes Milled Fiberglass