This Is Dremel's Diamond Wheel Accessory Bit. Features: * A metal wheel completely coated with fine diamond particles for working with hard materials. * Designed to last and not lose its shape or break. * Provides smooth fine cuts. * Great for cutting, sawing, carving, sharpening, and filing of hard materials. * Use on wood, concrete, brick, porcelain, ceramics, tile, epoxy, marble.
...more about the Dremel Mfg. Co. Diamond Wheel
|
These Are 1-1/2" Reinforced Cut-Off Wheels from Dremel. Features: * Makes it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. * For slicing and cutting metal, wood and plastic. * Made of a hard abrasive and reinforced with fiberglass for extra strength. * Designed to be used with a washer set that provides extra support. * Ideal for cutting, grooving and trimming all kinds of materials including metal, wood and ceramics. * Cut through pipe, gutters, rusty bolts, hose clamps, sheet metal and a whole lot more!.
...more about the Dremel Mfg. Co. Cut-Off Wheels 1-1/2'' (10)
|
A cutting disc made of a hard abrasive with a diameter of 15/16" (23.8 mm) and a width of 0.025" (0.64 mm). Ideal for cutting, grooving and trimming all kinds of materialsincluding metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more.
...more about the Dremel Mfg. Co. Cut-Off Wheel .025'' (36)
|
A cutting disc made of a hard abrasive with a diameter of 15/16" (23.8 mm) and a width of 0.040" (1.0 mm). Ideal for cutting, grooving and trimming all kinds of materialsincluding metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more.
...more about the Dremel Mfg. Co. Heavy Duty Cut-Off Wheel (20)
|
Cut-off wheel is reinforced with fiberglass for increased durability. For slicing and cutting metal including hardened steel. Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them. Ideal for cutting, grooving and trimming all kinds of metal. May also be used on other materials-including thin wood, plastics and ceramics.
...more about the Dremel Mfg. Co. Fiberglass H/D Cut-Off Wheel (5)
|
This is a Dremel EZ Lock Diamond Wheel. Features: * A metal wheel completely coated with fine diamond particles for working with hard materials. * Designed to last and not lose its shape or break. * Easy installation-just pull, twist and release. * Rated for tile cutting.
...more about the Dremel Mfg. Co. EZ Lock Diamond Wheel
|
|
|
|
|
|
|
|
|
This is Package of Two 2" x 1/8" x 1/32" High Tensile Fiber Disks from Gyros Products. Features: * Formulated to cleanly cut high tensile strength materials such as hardened and unhardened steels, steel alloys, hard bronze, etc. * Sharp cutting action produces a clean, smooth finish. * Fiberglass-reinforced structure gives unsurpassed strength and flexibility making them long-lasting and resistant to breakage. * Designed specifically for use in all motorized rotating hand tools. * Will stand up to prolonged use with minimum sparking, no premature wear, and without overheating parts being cut. * Uses mandrel #GYRR4500. * Includes two 1/2" OD washers. * Carded packaging.
...more about the Gyros Products Co Fiber Disk 2x32x1/8'' (2)
|
This is a Package of Two 1" Tuf-Grind Grinding Wheels from House of Balsa. Features: * Reinforced to prevent breakage and shattering. * Strong enough to cut and grind just about anything-steel, fiberglass, plastics, wood, etc. * Fits all standard motorized hobby grinding tools with a 1/8" chuck.
...more about the House of Balsa Tuf-Grind 1'' (2)
|
This is a 2" Tuf-Grind Combo from House of Balsa. Features: * Reinforced to prevent breakage and shattering. * Strong enough to cut and grind just about anything-steel, fiberglass, plastics, wood, etc. * Fits all standard motorized hobby grinding tools with a 1/8" chuck. * Includes a mandrel for holding the grinding wheel and a nut and washer for securing the grinding wheel.
...more about the House of Balsa Super Tuf-Grind Combo
|
This is a 2" Tuf-Grind Grinding Wheel from House of Balsa. Features: * Reinforced to prevent breakage and shattering. * Strong enough to cut and grind just about anything-steel, fiberglass, plastics, wood, etc. * Fits all standard motorized hobby grinding tools with a 1/8" chuck.
...more about the House of Balsa Tuf-Grind 2''
|
